 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7756 FW256 N-Channel Silicon MOSFET FW256 Features * * * * General-Purpose Switching Device Applications For DC / DC converters, Motor drives, Inverters. Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Total Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD PT Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board(1200mm2!0.8mm) 1unit, PW10s Mounted on a ceramic board(1200mm2!0.8mm), PW10s Conditions Ratings 60 20 5 14 2.0 2.3 150 --55 to +150 Unit V V A A W W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss Conditions ID=1mA, VGS=0 VDS=60V, VGS=0 VGS= 16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=3A ID=3A, VGS=10V ID=3A, VGS=4V VDS=20V, f=1MHz VDS=20V, f=1MHz VDS=20V, f=1MHz Ratings min 60 1 10 1.2 4 6 43 56 790 115 88 58 84 2.6 typ max Unit V A A V S m m pF pF pF Marking : W256 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 73004 TS IM TA-101129 No.7756-1/4 FW256 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol td(on) tr td(off) tf Qg Qgs Qgd VSD Conditions See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. VDS=30V, VGS=10V, ID=5A VDS=30V, VGS=10V, ID=5A VDS=30V, VGS=10V, ID=5A IS=5A, VGS=0 Ratings min typ 10 22 74 48 16 4 3.4 0.86 1.2 max Unit ns ns ns ns nC nC nC V Package Dimensions unit : mm 2129 8 5 0.3 Switching Time Test Circuit VIN 10V 0V VIN VDD=30V ID=3A RL=10 4.4 6.0 D VOUT 5.0 1.5 1.8max 1 4 0.2 0.595 1.27 0.43 0.1 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : SOP8 PW=10s D.C.1% G FW256 P.G 50 S 5.0 ID -- VDS 3.5 V 10V 8.0V 6 .0 10 ID -- VGS VDS=10V 4.0V 4.0 V 4.5 9 Drain Current, ID -- A 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 Drain Current, ID -- A VGS=3.0V 8 7 6 5 4 5.0 V 75C 0 0.5 1.0 1.5 2.0 3 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.5 3.0 3.5 4.0 Drain-to-Source Voltage, VDS -- V IT05210 Gate-to-Source Voltage, VGS -- V 25 2 C Ta= --25C IT05211 No.7756-2/4 FW256 150 140 RDS(on) -- VGS Static Drain-to-Source On-State Resistance, RDS(on) -- m Ta=25C ID=3A 120 110 100 90 80 70 60 50 40 30 20 10 --60 --40 --20 0 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- m 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0 2 4 6 8 10 12 10 3 S= I D= , VG 3A I D= VG A, 4 S= V V 14 16 20 40 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V 10 yfs -- ID IT05212 10 7 5 Ambient Temperature, Ta -- C IT05213 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S 7 5 3 2 VDS=10V Forward Drain Current, IF -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 1.0 7 5 3 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Drain Current, ID -- A 5 3 5 7 10 IT05214 0.01 0.2 0.4 Ta= 7 C a= T 25 C 75 0.6 --25 C 0.8 5C 25 C --2 5 C 1.0 1.2 IT05215 SW Time -- ID 3 Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V Switching Time, SW Time -- ns 2 100 7 5 3 2 10 7 5 3 2 1.0 0.1 VDD=30V VGS=10V 2 Ciss, Coss, Crss -- pF td(off) tf tr 100 7 5 3 2 Ciss td(on) 100 7 5 3 Coss Crss 2 3 5 7 1.0 2 3 5 Drain Current, ID -- A 10 9 10 IT05216 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 7 0 5 10 15 20 25 30 IT05217 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS=30V ID=5A IDP=14A ID=5A <100s 8 1m Drain Current, ID -- A s 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 14 16 18 20 10 DC Operation in this area is limited by RDS(on). ms op 10 era tio n(P 0m s W 1 0 s) 0.01 0.1 Ta=25C Single pulse Mounted on a ceramic board(1200mm2!0.8mm) 1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 Total Gate Charge, Qg -- nC IT05218 Drain-to-Source Voltage, VDS -- V 5 7 100 IT05219 No.7756-3/4 FW256 Allowable Power Dissipation (FET 1), PD -- W 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 PD(FET 1) -- PD(FET 2) M ou 2.5 PD -- Ta Mounted on a ceramic board (1200mm2!0.8mm), PW10s nte Allowable Power Dissipation, PD -- W 2.3 2.0 do na cer am ic bo ard 1.5 To t 1u al (12 di 00 ss mm 2 !0 1.0 nit ip ati on .8m m) ,P W 1 0 s 0.5 0 0 20 40 60 80 100 120 140 160 Allowable Power Dissipation (FET 2), PD -- W IT05220 Ambient Temperature, Ta -- C IT05221 Note on usage : Since the FW256 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7756-4/4 |
Price & Availability of FW256
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |